// $Header: /root/leakn64/depot/rf/hw/flif/xilinx/GT10.v,v 1.1 2003/08/20 23:46:46 berndt Exp $
//**************************************************************
//  Copyright (c) 2002 Xilinx Inc.  All Rights Reserved
//  File Name    : GT10.v
//  Module Name  : GT10
//  Function     : Gigabit Transceiver
//  Site         : GT10
//  Spec Version : 1.19
//  Generated by : write_verilog
//**************************************************************

`timescale 1 ps / 1 ps 

module GT10 (
	CHBONDDONE,
	CHBONDO,
	PMACMOUT,
	RXBUFSTATUS,
	RXCHARISCOMMA,
	RXCHARISK,
	RXCHECKINGCRC,
	RXCLKCORCNT,
	RXCOMMADET,
	RXCRCERR,
	RXDATA,
	RXDISPERR,
	RXLOSSOFSYNC,
	RXNOTINTABLE,
	RXREALIGN,
	RXRECCLK,
	RXRUNDISP,
	TXBUFERR,
	TXKERR,
	TXN,
	TXOUTCLK,
	TXP,
	TXRUNDISP,

	BREFCLKNIN,
	BREFCLKPIN,
	CHBONDI,
	DISPREGSEL,
	ENCHANSYNC,
	ENMCOMMAALIGN,
	ENPCOMMAALIGN,
	LOOPBACK,
	PMACMIN,
	PMALOOPBACK,
	PMAPWRDN,
	PMAREGADDR,
	PMAREGDATAIN,
	PMAREGLOAD,
	PMAREGRW,
	PMAREGSTROBE,
	PMARXCLK0SEL,
	PMARXCLK1SEL,
	PMARXLATCHSEL,
	PMARXRECCLKSEL,
	PMATERMEN,
	PMATXCLK0SEL,
	PMATXCLK1SEL,
	PMATXLATCHSEL,
	PMATXOUTCLKSEL,
	POWERDOWN,
	REFCLK,
	REFCLK2,
	REFCLKBSEL,
	REFCLKSEL,
	RXDATAWIDTH,
	RXDECODEUSE,
	RXINTDATAWIDTH,
	RXN,
	RXP,
	RXPOLARITY,
	RXRESET,
	RXUSRCLK,
	RXUSRCLK2,
	TXDATAWIDTH,
	TXINTDATAWIDTH,
	TXBYPASS8B10B,
	TXCHARDISPMODE,
	TXCHARDISPVAL,
	TXCHARISK,
	TXDATA,
	TXFORCECRCERR,
	TXINHIBIT,
	TXPOLARITY,
	TXRESET,
	TXUSRCLK,
	TXUSRCLK2
);

parameter ALIGN_COMMA_MSB = "FALSE";
parameter CHAN_BOND_LIMIT = 8;
parameter CHAN_BOND_MODE = "OFF";
parameter CHAN_BOND_OFFSET = 4;
parameter CHAN_BOND_ONE_SHOT = "FALSE";
parameter CHAN_BOND_SEQ_1_1 = 11'b00000000000;
parameter CHAN_BOND_SEQ_1_2 = 11'b00000000000;
parameter CHAN_BOND_SEQ_1_3 = 11'b00000000000;
parameter CHAN_BOND_SEQ_1_4 = 11'b00000000000;
parameter CHAN_BOND_SEQ_2_1 = 11'b00000000000;
parameter CHAN_BOND_SEQ_2_2 = 11'b00000000000;
parameter CHAN_BOND_SEQ_2_3 = 11'b00000000000;
parameter CHAN_BOND_SEQ_2_4 = 11'b00000000000;
parameter CHAN_BOND_SEQ_2_USE = "FALSE";
parameter CHAN_BOND_SEQ_LEN = 1;
parameter CHAN_BOND_WAIT = 4;
parameter CLK_COR_INSERT_IDLE_FLAG = "FALSE";
parameter CLK_COR_KEEP_IDLE = "FALSE";
parameter CLK_COR_REPEAT_WAIT = 1;
parameter CLK_COR_SEQ_1_1 = 11'b00000000000;
parameter CLK_COR_SEQ_1_2 = 11'b00000000000;
parameter CLK_COR_SEQ_1_3 = 11'b00000000000;
parameter CLK_COR_SEQ_1_4 = 11'b00000000000;
parameter CLK_COR_SEQ_2_1 = 11'b00000000000;
parameter CLK_COR_SEQ_2_2 = 11'b00000000000;
parameter CLK_COR_SEQ_2_3 = 11'b00000000000;
parameter CLK_COR_SEQ_2_4 = 11'b00000000000;
parameter CLK_COR_SEQ_2_USE = "FALSE";
parameter CLK_COR_SEQ_LEN = 1;
parameter CLK_CORRECT_USE = "TRUE";
parameter COMMA_10B_MASK = 10'b1111111000;
parameter CRC_END_OF_PKT = "K29_7";
parameter CRC_FORMAT = "USER_MODE";
parameter CRC_START_OF_PKT = "K27_7";
parameter DEC_MCOMMA_DETECT = "TRUE";
parameter DEC_PCOMMA_DETECT = "TRUE";
parameter DEC_VALID_COMMA_ONLY = "TRUE";
parameter MCOMMA_10B_VALUE = 10'b1100000000;
parameter MCOMMA_DETECT = "TRUE";
parameter PCOMMA_10B_VALUE = 10'b0011111000;
parameter PCOMMA_DETECT = "TRUE";
parameter PMA_SPEED = 0;
parameter PMARXFDETSEL = 3'b000;
parameter PMATXCMSET0 = 2'b00;
parameter PMATXCMSET1 = 2'b00;
parameter PMATXVCODACSEL = "FALSE";
parameter PMAVSEL = "FALSE";
parameter RX_BUFFER_USE = "TRUE";
parameter RX_CRC_USE = "FALSE";
parameter RX_LOS_INVALID_INCR = 1;
parameter RX_LOS_THRESHOLD = 4;
parameter RX_LOSS_OF_SYNC_FSM = "TRUE";
parameter SH_CNT_MAX = 8'b01000000;
parameter SH_INVALID_CNT_MAX = 8'b01000000;
parameter TX_6466GEARBOX_USE = "TRUE";
parameter TX_6466SCRAMBLER_USE = "TRUE";
parameter TX_BUFFER_USE = "TRUE";
parameter TX_CRC_FORCE_VALUE = 8'b11010110;
parameter TX_CRC_USE = "FALSE";

output CHBONDDONE;
output [3:0] CHBONDO;
output PMACMOUT;
output [1:0] RXBUFSTATUS;
output [7:0] RXCHARISCOMMA;
output [7:0] RXCHARISK;
output RXCHECKINGCRC;
output [2:0] RXCLKCORCNT;
output RXCOMMADET;
output RXCRCERR;
output [63:0] RXDATA;
output [7:0] RXDISPERR;
output [1:0] RXLOSSOFSYNC;
output [7:0] RXNOTINTABLE;
output RXREALIGN;
output RXRECCLK;
output [7:0] RXRUNDISP;
output TXBUFERR;
output [7:0] TXKERR;
output TXN;
output TXOUTCLK;
output TXP;
output [7:0] TXRUNDISP;

input BREFCLKNIN;
input BREFCLKPIN;
input [3:0] CHBONDI;
input [2:0] DISPREGSEL;
input ENCHANSYNC;
input ENMCOMMAALIGN;
input ENPCOMMAALIGN;
input [1:0] LOOPBACK;
input PMACMIN;
input [1:0] PMALOOPBACK;
input [2:0] PMAPWRDN;
input [5:0] PMAREGADDR;
input [7:0] PMAREGDATAIN;
input PMAREGLOAD;
input PMAREGRW;
input PMAREGSTROBE;
input PMARXCLK0SEL;
input PMARXCLK1SEL;
input PMARXLATCHSEL;
input [1:0] PMARXRECCLKSEL;
input [1:0] PMATERMEN;
input PMATXCLK0SEL;
input PMATXCLK1SEL;
input PMATXLATCHSEL;
input [1:0] PMATXOUTCLKSEL;
input POWERDOWN;
input REFCLK;
input REFCLK2;
input REFCLKBSEL;
input REFCLKSEL;
input [1:0] RXDATAWIDTH;
input RXDECODEUSE;
input RXINTDATAWIDTH;
input RXN;
input RXP;
input RXPOLARITY;
input RXRESET;
input RXUSRCLK;
input RXUSRCLK2;
input [1:0] TXDATAWIDTH;
input TXINTDATAWIDTH;
input [7:0] TXBYPASS8B10B;
input [7:0] TXCHARDISPMODE;
input [7:0] TXCHARDISPVAL;
input [7:0] TXCHARISK;
input [63:0] TXDATA;
input TXFORCECRCERR;
input TXINHIBIT;
input TXPOLARITY;
input TXRESET;
input TXUSRCLK;
input TXUSRCLK2;

reg ALIGN_COMMA_MSB_BINARY;
reg [4:0] CHAN_BOND_LIMIT_BINARY;
reg [1:0] CHAN_BOND_MODE_BINARY;
reg [3:0] CHAN_BOND_OFFSET_BINARY;
reg CHAN_BOND_ONE_SHOT_BINARY;
reg CHAN_BOND_SEQ_2_USE_BINARY;
reg [1:0] CHAN_BOND_SEQ_LEN_BINARY;
reg [3:0] CHAN_BOND_WAIT_BINARY;
reg CLK_COR_INSERT_IDLE_FLAG_BINARY;
reg CLK_COR_KEEP_IDLE_BINARY;
reg [4:0] CLK_COR_REPEAT_WAIT_BINARY;
reg CLK_COR_SEQ_2_USE_BINARY;
reg [1:0] CLK_COR_SEQ_LEN_BINARY;
reg CLK_CORRECT_USE_BINARY;
reg [9:0] CRC_END_OF_PKT_BINARY;
reg [1:0] CRC_FORMAT_BINARY;
reg [9:0] CRC_START_OF_PKT_BINARY;
reg DEC_MCOMMA_DETECT_BINARY;
reg DEC_PCOMMA_DETECT_BINARY;
reg DEC_VALID_COMMA_ONLY_BINARY;
reg MCOMMA_DETECT_BINARY;
reg PCOMMA_DETECT_BINARY;
reg [31:0] PMA_SPEED_BINARY;
reg PMATXVCODACSEL_BINARY;
reg PMAVSEL_BINARY;
reg RX_BUFFER_USE_BINARY;
reg RX_CRC_USE_BINARY;
reg [6:0] RX_LOS_INVALID_INCR_BINARY;
reg [7:0] RX_LOS_THRESHOLD_BINARY;
reg RX_LOSS_OF_SYNC_FSM_BINARY;
reg TX_6466GEARBOX_USE_BINARY;
reg TX_6466SCRAMBLER_USE_BINARY;
reg TX_BUFFER_USE_BINARY;
reg TX_CRC_USE_BINARY;

tri0 GSR = glbl.GSR;

reg notifier;

wire CHBONDDONE_OUT;
wire [3:0] CHBONDO_OUT;
wire PMACMOUT_OUT;
wire [1:0] RXBUFSTATUS_OUT;
wire [7:0] RXCHARISCOMMA_OUT;
wire [7:0] RXCHARISK_OUT;
wire RXCHECKINGCRC_OUT;
wire [2:0] RXCLKCORCNT_OUT;
wire RXCOMMADET_OUT;
wire RXCRCERR_OUT;
wire [63:0] RXDATA_OUT;
wire [7:0] RXDISPERR_OUT;
wire [1:0] RXLOSSOFSYNC_OUT;
wire [7:0] RXNOTINTABLE_OUT;
wire RXREALIGN_OUT;
wire RXRECCLK_OUT;
wire [7:0] RXRUNDISP_OUT;
wire TXBUFERR_OUT;
wire [7:0] TXKERR_OUT;
// wire TXN_OUT;
wire TXOUTCLK_OUT;
// wire TXP_OUT;
wire [7:0] TXRUNDISP_OUT;
wire BREFCLKNIN_IN;
wire BREFCLKPIN_IN;
wire [3:0] CHBONDI_IN;
wire [2:0] DISPREGSEL_IN;
wire ENCHANSYNC_IN;
wire ENMCOMMAALIGN_IN;
wire ENPCOMMAALIGN_IN;
wire [1:0] LOOPBACK_IN;
wire PMACMIN_IN;
wire [1:0] PMALOOPBACK_IN;
wire [2:0] PMAPWRDN_IN;
wire [5:0] PMAREGADDR_IN;
wire [7:0] PMAREGDATAIN_IN;
wire PMAREGLOAD_IN;
wire PMAREGRW_IN;
wire PMAREGSTROBE_IN;
wire PMARXCLK0SEL_IN;
wire PMARXCLK1SEL_IN;
wire PMARXLATCHSEL_IN;
wire [1:0] PMARXRECCLKSEL_IN;
wire [1:0] PMATERMEN_IN;
wire PMATXCLK0SEL_IN;
wire PMATXCLK1SEL_IN;
wire PMATXLATCHSEL_IN;
wire [1:0] PMATXOUTCLKSEL_IN;
wire POWERDOWN_IN;
wire REFCLK_IN;
wire REFCLK2_IN;
wire REFCLKBSEL_IN;
wire REFCLKSEL_IN;
wire [1:0] RXDATAWIDTH_IN;
wire RXDECODEUSE_IN;
wire RXINTDATAWIDTH_IN;
wire RXN_IN;
wire RXP_IN;
wire RXPOLARITY_IN;
wire RXRESET_IN;
wire RXUSRCLK_IN;
wire RXUSRCLK2_IN;
wire [1:0] TXDATAWIDTH_IN;
wire TXINTDATAWIDTH_IN;
wire [7:0] TXBYPASS8B10B_IN;
wire [7:0] TXCHARDISPMODE_IN;
wire [7:0] TXCHARDISPVAL_IN;
wire [7:0] TXCHARISK_IN;
wire [63:0] TXDATA_IN;
wire TXFORCECRCERR_IN;
wire TXINHIBIT_IN;
wire TXPOLARITY_IN;
wire TXRESET_IN;
wire TXUSRCLK_IN;
wire TXUSRCLK2_IN;

initial begin
	case (ALIGN_COMMA_MSB)
		"FALSE" : ALIGN_COMMA_MSB_BINARY <= 0;
		"TRUE" : ALIGN_COMMA_MSB_BINARY <= 1;
		default : begin
			$display("Attribute Syntax Error : The Attribute ALIGN_COMMA_MSB on GT10 instance %m is set to %s.  Legal values for this attribute are TRUE or FALSE.", ALIGN_COMMA_MSB);
			$finish;
		end
	endcase

	case (CHAN_BOND_LIMIT)
		1 : CHAN_BOND_LIMIT_BINARY <= 5'b00000;
		2 : CHAN_BOND_LIMIT_BINARY <= 5'b00001;
		3 : CHAN_BOND_LIMIT_BINARY <= 5'b00010;
		4 : CHAN_BOND_LIMIT_BINARY <= 5'b00011;
		5 : CHAN_BOND_LIMIT_BINARY <= 5'b00100;
		6 : CHAN_BOND_LIMIT_BINARY <= 5'b00101;
		7 : CHAN_BOND_LIMIT_BINARY <= 5'b00110;
		8 : CHAN_BOND_LIMIT_BINARY <= 5'b00111;
		9 : CHAN_BOND_LIMIT_BINARY <= 5'b01000;
		10 : CHAN_BOND_LIMIT_BINARY <= 5'b01001;
		11 : CHAN_BOND_LIMIT_BINARY <= 5'b01010;
		12 : CHAN_BOND_LIMIT_BINARY <= 5'b01011;
		13 : CHAN_BOND_LIMIT_BINARY <= 5'b01100;
		14 : CHAN_BOND_LIMIT_BINARY <= 5'b01101;
		15 : CHAN_BOND_LIMIT_BINARY <= 5'b01110;
		16 : CHAN_BOND_LIMIT_BINARY <= 5'b01111;
		default : begin
			$display("Attribute Syntax Error : The Attribute CHAN_BOND_LIMIT on GT10 instance %m is set to %d.  Legal values for this attribute are 1 to 16.", CHAN_BOND_LIMIT);
			$finish;
		end
	endcase

	case (CHAN_BOND_MODE)
		"OFF" : CHAN_BOND_MODE_BINARY <= 2'b00;
		"MASTER" : CHAN_BOND_MODE_BINARY <= 2'b01;
		"SLAVE_1_HOP" : CHAN_BOND_MODE_BINARY <= 2'b10;
		"SLAVE_2_HOPS" : CHAN_BOND_MODE_BINARY <= 2'b11;
		default : begin
			$display("Attribute Syntax Error : The Attribute CHAN_BOND_MODE on GT10 instance %m is set to %s.  Legal values for this attribute are OFF, MASTER, SLAVE_1_HOP or SLAVE_2_HOPS.", CHAN_BOND_MODE);
			$finish;
		end
	endcase

	case (CHAN_BOND_OFFSET)
		0 : CHAN_BOND_OFFSET_BINARY <= 4'b0000;
		1 : CHAN_BOND_OFFSET_BINARY <= 4'b0001;
		2 : CHAN_BOND_OFFSET_BINARY <= 4'b0010;
		3 : CHAN_BOND_OFFSET_BINARY <= 4'b0011;
		4 : CHAN_BOND_OFFSET_BINARY <= 4'b0100;
		5 : CHAN_BOND_OFFSET_BINARY <= 4'b0101;
		6 : CHAN_BOND_OFFSET_BINARY <= 4'b0110;
		7 : CHAN_BOND_OFFSET_BINARY <= 4'b0111;
		default : begin
			$display("Attribute Syntax Error : The Attribute CHAN_BOND_OFFSET on GT10 instance %m is set to %d.  Legal values for this attribute are 0 to 7.", CHAN_BOND_OFFSET);
			$finish;
		end
	endcase

	case (CHAN_BOND_ONE_SHOT)
		"FALSE" : CHAN_BOND_ONE_SHOT_BINARY <= 0;
		"TRUE" : CHAN_BOND_ONE_SHOT_BINARY <= 1;
		default : begin
			$display("Attribute Syntax Error : The Attribute CHAN_BOND_ONE_SHOT on GT10 instance %m is set to %s.  Legal values for this attribute are TRUE or FALSE.", CHAN_BOND_ONE_SHOT);
			$finish;
		end
	endcase

	case (CHAN_BOND_SEQ_2_USE)
		"FALSE" : CHAN_BOND_SEQ_2_USE_BINARY <= 0;
		"TRUE" : CHAN_BOND_SEQ_2_USE_BINARY <= 1;
		default : begin
			$display("Attribute Syntax Error : The Attribute CHAN_BOND_SEQ_2_USE on GT10 instance %m is set to %s.  Legal values for this attribute are TRUE or FALSE.", CHAN_BOND_SEQ_2_USE);
			$finish;
		end
	endcase

	case (CHAN_BOND_SEQ_LEN)
		1 : CHAN_BOND_SEQ_LEN_BINARY <= 2'b01;
		2 : CHAN_BOND_SEQ_LEN_BINARY <= 2'b10;
		3 : CHAN_BOND_SEQ_LEN_BINARY <= 2'b11;
		4 : CHAN_BOND_SEQ_LEN_BINARY <= 2'b00;
		default : begin
			$display("Attribute Syntax Error : The Attribute CHAN_BOND_SEQ_LEN on GT10 instance %m is set to %d.  Legal values for this attribute are 1 to 4.", CHAN_BOND_SEQ_LEN);
			$finish;
		end
	endcase

	case (CHAN_BOND_WAIT)
		1 : CHAN_BOND_WAIT_BINARY <= 4'b0001;
		2 : CHAN_BOND_WAIT_BINARY <= 4'b0010;
		3 : CHAN_BOND_WAIT_BINARY <= 4'b0011;
		4 : CHAN_BOND_WAIT_BINARY <= 4'b0100;
		5 : CHAN_BOND_WAIT_BINARY <= 4'b0101;
		6 : CHAN_BOND_WAIT_BINARY <= 4'b0110;
		7 : CHAN_BOND_WAIT_BINARY <= 4'b0111;
		default : begin
			$display("Attribute Syntax Error : The Attribute CHAN_BOND_WAIT on GT10 instance %m is set to %d.  Legal values for this attribute are 1 to 7.", CHAN_BOND_WAIT);
			$finish;
		end
	endcase

	case (CLK_COR_INSERT_IDLE_FLAG)
		"FALSE" : CLK_COR_INSERT_IDLE_FLAG_BINARY <= 0;
		"TRUE" : CLK_COR_INSERT_IDLE_FLAG_BINARY <= 1;
		default : begin
			$display("Attribute Syntax Error : The Attribute CLK_COR_INSERT_IDLE_FLAG on GT10 instance %m is set to %s.  Legal values for this attribute are TRUE or FALSE.", CLK_COR_INSERT_IDLE_FLAG);
			$finish;
		end
	endcase

	case (CLK_COR_KEEP_IDLE)
		"FALSE" : CLK_COR_KEEP_IDLE_BINARY <= 0;
		"TRUE" : CLK_COR_KEEP_IDLE_BINARY <= 1;
		default : begin
			$display("Attribute Syntax Error : The Attribute CLK_COR_KEEP_IDLE on GT10 instance %m is set to %s.  Legal values for this attribute are TRUE or FALSE.", CLK_COR_KEEP_IDLE);
			$finish;
		end
	endcase

	case (CLK_COR_REPEAT_WAIT)
		0 : CLK_COR_REPEAT_WAIT_BINARY <= 5'b00000;
		1 : CLK_COR_REPEAT_WAIT_BINARY <= 5'b00001;
		2 : CLK_COR_REPEAT_WAIT_BINARY <= 5'b00010;
		3 : CLK_COR_REPEAT_WAIT_BINARY <= 5'b00011;
		4 : CLK_COR_REPEAT_WAIT_BINARY <= 5'b00100;
		5 : CLK_COR_REPEAT_WAIT_BINARY <= 5'b00101;
		6 : CLK_COR_REPEAT_WAIT_BINARY <= 5'b00110;
		7 : CLK_COR_REPEAT_WAIT_BINARY <= 5'b00111;
		8 : CLK_COR_REPEAT_WAIT_BINARY <= 5'b01000;
		9 : CLK_COR_REPEAT_WAIT_BINARY <= 5'b01001;
		10 : CLK_COR_REPEAT_WAIT_BINARY <= 5'b01010;
		11 : CLK_COR_REPEAT_WAIT_BINARY <= 5'b01011;
		12 : CLK_COR_REPEAT_WAIT_BINARY <= 5'b01100;
		13 : CLK_COR_REPEAT_WAIT_BINARY <= 5'b01101;
		14 : CLK_COR_REPEAT_WAIT_BINARY <= 5'b01110;
		15 : CLK_COR_REPEAT_WAIT_BINARY <= 5'b01111;
		16 : CLK_COR_REPEAT_WAIT_BINARY <= 5'b10000;
		17 : CLK_COR_REPEAT_WAIT_BINARY <= 5'b10001;
		18 : CLK_COR_REPEAT_WAIT_BINARY <= 5'b10010;
		19 : CLK_COR_REPEAT_WAIT_BINARY <= 5'b10011;
		20 : CLK_COR_REPEAT_WAIT_BINARY <= 5'b10100;
		21 : CLK_COR_REPEAT_WAIT_BINARY <= 5'b10101;
		22 : CLK_COR_REPEAT_WAIT_BINARY <= 5'b10110;
		23 : CLK_COR_REPEAT_WAIT_BINARY <= 5'b10111;
		24 : CLK_COR_REPEAT_WAIT_BINARY <= 5'b11000;
		25 : CLK_COR_REPEAT_WAIT_BINARY <= 5'b11001;
		26 : CLK_COR_REPEAT_WAIT_BINARY <= 5'b11010;
		27 : CLK_COR_REPEAT_WAIT_BINARY <= 5'b11011;
		28 : CLK_COR_REPEAT_WAIT_BINARY <= 5'b11100;
		29 : CLK_COR_REPEAT_WAIT_BINARY <= 5'b11101;
		30 : CLK_COR_REPEAT_WAIT_BINARY <= 5'b11110;
		31 : CLK_COR_REPEAT_WAIT_BINARY <= 5'b11111;
		default : begin
			$display("Attribute Syntax Error : The Attribute CLK_COR_REPEAT_WAIT on GT10 instance %m is set to %d.  Legal values for this attribute are 0 to 31.", CLK_COR_REPEAT_WAIT);
			$finish;
		end
	endcase

	case (CLK_COR_SEQ_2_USE)
		"FALSE" : CLK_COR_SEQ_2_USE_BINARY <= 0;
		"TRUE" : CLK_COR_SEQ_2_USE_BINARY <= 1;
		default : begin
			$display("Attribute Syntax Error : The Attribute CLK_COR_SEQ_2_USE on GT10 instance %m is set to %s.  Legal values for this attribute are TRUE or FALSE.", CLK_COR_SEQ_2_USE);
			$finish;
		end
	endcase

	case (CLK_COR_SEQ_LEN)
		1 : CLK_COR_SEQ_LEN_BINARY <= 2'b01;
		2 : CLK_COR_SEQ_LEN_BINARY <= 2'b10;
		3 : CLK_COR_SEQ_LEN_BINARY <= 2'b11;
		4 : CLK_COR_SEQ_LEN_BINARY <= 2'b00;
		default : begin
			$display("Attribute Syntax Error : The Attribute CLK_COR_SEQ_LEN on GT10 instance %m is set to %d.  Legal values for this attribute are 1 to 4.", CLK_COR_SEQ_LEN);
			$finish;
		end
	endcase

	case (CLK_CORRECT_USE)
		"FALSE" : CLK_CORRECT_USE_BINARY <= 0;
		"TRUE" : CLK_CORRECT_USE_BINARY <= 1;
		default : begin
			$display("Attribute Syntax Error : The Attribute CLK_CORRECT_USE on GT10 instance %m is set to %s.  Legal values for this attribute are TRUE or FALSE.", CLK_CORRECT_USE);
			$finish;
		end
	endcase

	case (CRC_END_OF_PKT)
		"K29_7" : CRC_END_OF_PKT_BINARY <= 10'b0011111101;
		"K28_0" : CRC_END_OF_PKT_BINARY <= 10'b0000011100;
		"K28_1" : CRC_END_OF_PKT_BINARY <= 10'b0000111100;
		"K28_2" : CRC_END_OF_PKT_BINARY <= 10'b0001011100;
		"K28_3" : CRC_END_OF_PKT_BINARY <= 10'b0001111100;
		"K28_4" : CRC_END_OF_PKT_BINARY <= 10'b0010011100;
		"K28_5" : CRC_END_OF_PKT_BINARY <= 10'b0010111100;
		"K28_6" : CRC_END_OF_PKT_BINARY <= 10'b0011011100;
		"K28_7" : CRC_END_OF_PKT_BINARY <= 10'b0011111100;
		"K23_7" : CRC_END_OF_PKT_BINARY <= 10'b0011110111;
		"K27_7" : CRC_END_OF_PKT_BINARY <= 10'b0011111011;
		"K30_7" : CRC_END_OF_PKT_BINARY <= 10'b0011111110;
		default : begin
			$display("Attribute Syntax Error : The Attribute CRC_END_OF_PKT on GT10 instance %m is set to %s.  Legal values for this attribute are K29_7, K28_0, K28_1, K28_2, K28_3, K28_4, K28_5, K28_6, K28_7, K23_7, K27_7 or K30_7.", CRC_END_OF_PKT);
			$finish;
		end
	endcase

	case (CRC_FORMAT)
		"USER_MODE" : CRC_FORMAT_BINARY <= 2'b00;
		"ETHERNET" : CRC_FORMAT_BINARY <= 2'b01;
		"FIBRE_CHAN" : CRC_FORMAT_BINARY <= 2'b10;
		"INFINIBAND" : CRC_FORMAT_BINARY <= 2'b11;
		default : begin
			$display("Attribute Syntax Error : The Attribute CRC_FORMAT on GT10 instance %m is set to %s.  Legal values for this attribute are USER_MODE, ETHERNET, FIBRE_CHAN or INFINIBAND.", CRC_FORMAT);
			$finish;
		end
	endcase

	case (CRC_START_OF_PKT)
		"K27_7" : CRC_START_OF_PKT_BINARY <= 10'b0011111011;
		"K28_0" : CRC_START_OF_PKT_BINARY <= 10'b0000011100;
		"K28_1" : CRC_START_OF_PKT_BINARY <= 10'b0000111100;
		"K28_2" : CRC_START_OF_PKT_BINARY <= 10'b0001011100;
		"K28_3" : CRC_START_OF_PKT_BINARY <= 10'b0001111100;
		"K28_4" : CRC_START_OF_PKT_BINARY <= 10'b0010011100;
		"K28_5" : CRC_START_OF_PKT_BINARY <= 10'b0010111100;
		"K28_6" : CRC_START_OF_PKT_BINARY <= 10'b0011011100;
		"K28_7" : CRC_START_OF_PKT_BINARY <= 10'b0011111100;
		"K23_7" : CRC_START_OF_PKT_BINARY <= 10'b0011110111;
		"K29_7" : CRC_START_OF_PKT_BINARY <= 10'b0011111101;
		"K30_7" : CRC_START_OF_PKT_BINARY <= 10'b0011111110;
		default : begin
			$display("Attribute Syntax Error : The Attribute CRC_START_OF_PKT on GT10 instance %m is set to %s.  Legal values for this attribute are K27_7, K28_0, K28_1, K28_2, K28_3, K28_4, K28_5, K28_6, K28_7, K23_7, K29_7 or K30_7.", CRC_START_OF_PKT);
			$finish;
		end
	endcase

	case (DEC_MCOMMA_DETECT)
		"FALSE" : DEC_MCOMMA_DETECT_BINARY <= 0;
		"TRUE" : DEC_MCOMMA_DETECT_BINARY <= 1;
		default : begin
			$display("Attribute Syntax Error : The Attribute DEC_MCOMMA_DETECT on GT10 instance %m is set to %s.  Legal values for this attribute are TRUE or FALSE.", DEC_MCOMMA_DETECT);
			$finish;
		end
	endcase

	case (DEC_PCOMMA_DETECT)
		"FALSE" : DEC_PCOMMA_DETECT_BINARY <= 0;
		"TRUE" : DEC_PCOMMA_DETECT_BINARY <= 1;
		default : begin
			$display("Attribute Syntax Error : The Attribute DEC_PCOMMA_DETECT on GT10 instance %m is set to %s.  Legal values for this attribute are TRUE or FALSE.", DEC_PCOMMA_DETECT);
			$finish;
		end
	endcase

	case (DEC_VALID_COMMA_ONLY)
		"FALSE" : DEC_VALID_COMMA_ONLY_BINARY <= 0;
		"TRUE" : DEC_VALID_COMMA_ONLY_BINARY <= 1;
		default : begin
			$display("Attribute Syntax Error : The Attribute DEC_VALID_COMMA_ONLY on GT10 instance %m is set to %s.  Legal values for this attribute are TRUE or FALSE.", DEC_VALID_COMMA_ONLY);
			$finish;
		end
	endcase

	case (MCOMMA_DETECT)
		"FALSE" : MCOMMA_DETECT_BINARY <= 0;
		"TRUE" : MCOMMA_DETECT_BINARY <= 1;
		default : begin
			$display("Attribute Syntax Error : The Attribute MCOMMA_DETECT on GT10 instance %m is set to %s.  Legal values for this attribute are TRUE or FALSE.", MCOMMA_DETECT);
			$finish;
		end
	endcase

	case (PCOMMA_DETECT)
		"FALSE" : PCOMMA_DETECT_BINARY <= 0;
		"TRUE" : PCOMMA_DETECT_BINARY <= 1;
		default : begin
			$display("Attribute Syntax Error : The Attribute PCOMMA_DETECT on GT10 instance %m is set to %s.  Legal values for this attribute are TRUE or FALSE.", PCOMMA_DETECT);
			$finish;
		end
	endcase

	case (PMA_SPEED)
		0 : PMA_SPEED_BINARY <= 0;
		1 : PMA_SPEED_BINARY <= 0;
		2 : PMA_SPEED_BINARY <= 0;
		3 : PMA_SPEED_BINARY <= 0;
		4 : PMA_SPEED_BINARY <= 0;
		5 : PMA_SPEED_BINARY <= 0;
		6 : PMA_SPEED_BINARY <= 0;
		7 : PMA_SPEED_BINARY <= 0;
		8 : PMA_SPEED_BINARY <= 0;
		9 : PMA_SPEED_BINARY <= 0;
		10 : PMA_SPEED_BINARY <= 0;
		11 : PMA_SPEED_BINARY <= 0;
		12 : PMA_SPEED_BINARY <= 0;
		13 : PMA_SPEED_BINARY <= 0;
		14 : PMA_SPEED_BINARY <= 0;
		15 : PMA_SPEED_BINARY <= 0;
		16 : PMA_SPEED_BINARY <= 0;
		17 : PMA_SPEED_BINARY <= 0;
		18 : PMA_SPEED_BINARY <= 0;
		19 : PMA_SPEED_BINARY <= 0;
		20 : PMA_SPEED_BINARY <= 0;
		21 : PMA_SPEED_BINARY <= 0;
		22 : PMA_SPEED_BINARY <= 0;
		23 : PMA_SPEED_BINARY <= 0;
		24 : PMA_SPEED_BINARY <= 0;
		25 : PMA_SPEED_BINARY <= 0;
		26 : PMA_SPEED_BINARY <= 0;
		27 : PMA_SPEED_BINARY <= 0;
		28 : PMA_SPEED_BINARY <= 0;
		29 : PMA_SPEED_BINARY <= 0;
		30 : PMA_SPEED_BINARY <= 0;
		31 : PMA_SPEED_BINARY <= 0;
		default : begin
			$display("Attribute Syntax Error : The Attribute PMA_SPEED on GT10 instance %m is set to %d.  Legal values for this attribute are 0 to 31.", PMA_SPEED);
			$finish;
		end
	endcase

	case (PMATXVCODACSEL)
		"FALSE" : PMATXVCODACSEL_BINARY <= 0;
		"TRUE" : PMATXVCODACSEL_BINARY <= 1;
		default : begin
			$display("Attribute Syntax Error : The Attribute PMATXVCODACSEL on GT10 instance %m is set to %s.  Legal values for this attribute are TRUE or FALSE.", PMATXVCODACSEL);
			$finish;
		end
	endcase

	case (PMAVSEL)
		"FALSE" : PMAVSEL_BINARY <= 0;
		"TRUE" : PMAVSEL_BINARY <= 1;
		default : begin
			$display("Attribute Syntax Error : The Attribute PMAVSEL on GT10 instance %m is set to %s.  Legal values for this attribute are TRUE or FALSE.", PMAVSEL);
			$finish;
		end
	endcase

	case (RX_BUFFER_USE)
		"FALSE" : RX_BUFFER_USE_BINARY <= 0;
		"TRUE" : RX_BUFFER_USE_BINARY <= 1;
		default : begin
			$display("Attribute Syntax Error : The Attribute RX_BUFFER_USE on GT10 instance %m is set to %s.  Legal values for this attribute are TRUE or FALSE.", RX_BUFFER_USE);
			$finish;
		end
	endcase

	case (RX_CRC_USE)
		"FALSE" : RX_CRC_USE_BINARY <= 0;
		"TRUE" : RX_CRC_USE_BINARY <= 1;
		default : begin
			$display("Attribute Syntax Error : The Attribute RX_CRC_USE on GT10 instance %m is set to %s.  Legal values for this attribute are TRUE or FALSE.", RX_CRC_USE);
			$finish;
		end
	endcase

	case (RX_LOS_INVALID_INCR)
		1 : RX_LOS_INVALID_INCR_BINARY <= 7'b0000001;
		2 : RX_LOS_INVALID_INCR_BINARY <= 7'b0000010;
		4 : RX_LOS_INVALID_INCR_BINARY <= 7'b0000100;
		8 : RX_LOS_INVALID_INCR_BINARY <= 7'b0001000;
		16 : RX_LOS_INVALID_INCR_BINARY <= 7'b0010000;
		32 : RX_LOS_INVALID_INCR_BINARY <= 7'b0100000;
		64 : RX_LOS_INVALID_INCR_BINARY <= 7'b1000000;
		128 : RX_LOS_INVALID_INCR_BINARY <= 7'b0000000;
		default : begin
			$display("Attribute Syntax Error : The Attribute RX_LOS_INVALID_INCR on GT10 instance %m is set to %d.  Legal values for this attribute are 1, 2, 4, 8, 16, 32, 64 or 128.", RX_LOS_INVALID_INCR);
			$finish;
		end
	endcase

	case (RX_LOS_THRESHOLD)
		4 : RX_LOS_THRESHOLD_BINARY <= 8'b00000001;
		8 : RX_LOS_THRESHOLD_BINARY <= 8'b00000010;
		16 : RX_LOS_THRESHOLD_BINARY <= 8'b00000100;
		32 : RX_LOS_THRESHOLD_BINARY <= 8'b00001000;
		64 : RX_LOS_THRESHOLD_BINARY <= 8'b00010000;
		128 : RX_LOS_THRESHOLD_BINARY <= 8'b00100000;
		256 : RX_LOS_THRESHOLD_BINARY <= 8'b01000000;
		512 : RX_LOS_THRESHOLD_BINARY <= 8'b10000000;
		default : begin
			$display("Attribute Syntax Error : The Attribute RX_LOS_THRESHOLD on GT10 instance %m is set to %d.  Legal values for this attribute are 4, 8, 16, 32, 64, 128, 256 or 512.", RX_LOS_THRESHOLD);
			$finish;
		end
	endcase

	case (RX_LOSS_OF_SYNC_FSM)
		"FALSE" : RX_LOSS_OF_SYNC_FSM_BINARY <= 0;
		"TRUE" : RX_LOSS_OF_SYNC_FSM_BINARY <= 1;
		default : begin
			$display("Attribute Syntax Error : The Attribute RX_LOSS_OF_SYNC_FSM on GT10 instance %m is set to %s.  Legal values for this attribute are TRUE or FALSE.", RX_LOSS_OF_SYNC_FSM);
			$finish;
		end
	endcase

	case (TX_6466GEARBOX_USE)
		"FALSE" : TX_6466GEARBOX_USE_BINARY <= 0;
		"TRUE" : TX_6466GEARBOX_USE_BINARY <= 1;
		default : begin
			$display("Attribute Syntax Error : The Attribute TX_6466GEARBOX_USE on GT10 instance %m is set to %s.  Legal values for this attribute are TRUE or FALSE.", TX_6466GEARBOX_USE);
			$finish;
		end
	endcase

	case (TX_6466SCRAMBLER_USE)
		"FALSE" : TX_6466SCRAMBLER_USE_BINARY <= 0;
		"TRUE" : TX_6466SCRAMBLER_USE_BINARY <= 1;
		default : begin
			$display("Attribute Syntax Error : The Attribute TX_6466SCRAMBLER_USE on GT10 instance %m is set to %s.  Legal values for this attribute are TRUE or FALSE.", TX_6466SCRAMBLER_USE);
			$finish;
		end
	endcase

	case (TX_BUFFER_USE)
		"FALSE" : TX_BUFFER_USE_BINARY <= 0;
		"TRUE" : TX_BUFFER_USE_BINARY <= 1;
		default : begin
			$display("Attribute Syntax Error : The Attribute TX_BUFFER_USE on GT10 instance %m is set to %s.  Legal values for this attribute are TRUE or FALSE.", TX_BUFFER_USE);
			$finish;
		end
	endcase

	case (TX_CRC_USE)
		"FALSE" : TX_CRC_USE_BINARY <= 0;
		"TRUE" : TX_CRC_USE_BINARY <= 1;
		default : begin
			$display("Attribute Syntax Error : The Attribute TX_CRC_USE on GT10 instance %m is set to %s.  Legal values for this attribute are TRUE or FALSE.", TX_CRC_USE);
			$finish;
		end
	endcase

end

buf B_CHBONDDONE (CHBONDDONE, CHBONDDONE_OUT);
buf B_CHBONDO0 (CHBONDO[0], CHBONDO_OUT[0]);
buf B_CHBONDO1 (CHBONDO[1], CHBONDO_OUT[1]);
buf B_CHBONDO2 (CHBONDO[2], CHBONDO_OUT[2]);
buf B_CHBONDO3 (CHBONDO[3], CHBONDO_OUT[3]);
buf B_PMACMOUT (PMACMOUT, PMACMOUT_OUT);
buf B_RXBUFSTATUS0 (RXBUFSTATUS[0], RXBUFSTATUS_OUT[0]);
buf B_RXBUFSTATUS1 (RXBUFSTATUS[1], RXBUFSTATUS_OUT[1]);
buf B_RXCHARISCOMMA0 (RXCHARISCOMMA[0], RXCHARISCOMMA_OUT[0]);
buf B_RXCHARISCOMMA1 (RXCHARISCOMMA[1], RXCHARISCOMMA_OUT[1]);
buf B_RXCHARISCOMMA2 (RXCHARISCOMMA[2], RXCHARISCOMMA_OUT[2]);
buf B_RXCHARISCOMMA3 (RXCHARISCOMMA[3], RXCHARISCOMMA_OUT[3]);
buf B_RXCHARISCOMMA4 (RXCHARISCOMMA[4], RXCHARISCOMMA_OUT[4]);
buf B_RXCHARISCOMMA5 (RXCHARISCOMMA[5], RXCHARISCOMMA_OUT[5]);
buf B_RXCHARISCOMMA6 (RXCHARISCOMMA[6], RXCHARISCOMMA_OUT[6]);
buf B_RXCHARISCOMMA7 (RXCHARISCOMMA[7], RXCHARISCOMMA_OUT[7]);
buf B_RXCHARISK0 (RXCHARISK[0], RXCHARISK_OUT[0]);
buf B_RXCHARISK1 (RXCHARISK[1], RXCHARISK_OUT[1]);
buf B_RXCHARISK2 (RXCHARISK[2], RXCHARISK_OUT[2]);
buf B_RXCHARISK3 (RXCHARISK[3], RXCHARISK_OUT[3]);
buf B_RXCHARISK4 (RXCHARISK[4], RXCHARISK_OUT[4]);
buf B_RXCHARISK5 (RXCHARISK[5], RXCHARISK_OUT[5]);
buf B_RXCHARISK6 (RXCHARISK[6], RXCHARISK_OUT[6]);
buf B_RXCHARISK7 (RXCHARISK[7], RXCHARISK_OUT[7]);
buf B_RXCHECKINGCRC (RXCHECKINGCRC, RXCHECKINGCRC_OUT);
buf B_RXCLKCORCNT0 (RXCLKCORCNT[0], RXCLKCORCNT_OUT[0]);
buf B_RXCLKCORCNT1 (RXCLKCORCNT[1], RXCLKCORCNT_OUT[1]);
buf B_RXCLKCORCNT2 (RXCLKCORCNT[2], RXCLKCORCNT_OUT[2]);
buf B_RXCOMMADET (RXCOMMADET, RXCOMMADET_OUT);
buf B_RXCRCERR (RXCRCERR, RXCRCERR_OUT);
buf B_RXDATA0 (RXDATA[0], RXDATA_OUT[0]);
buf B_RXDATA1 (RXDATA[1], RXDATA_OUT[1]);
buf B_RXDATA2 (RXDATA[2], RXDATA_OUT[2]);
buf B_RXDATA3 (RXDATA[3], RXDATA_OUT[3]);
buf B_RXDATA4 (RXDATA[4], RXDATA_OUT[4]);
buf B_RXDATA5 (RXDATA[5], RXDATA_OUT[5]);
buf B_RXDATA6 (RXDATA[6], RXDATA_OUT[6]);
buf B_RXDATA7 (RXDATA[7], RXDATA_OUT[7]);
buf B_RXDATA8 (RXDATA[8], RXDATA_OUT[8]);
buf B_RXDATA9 (RXDATA[9], RXDATA_OUT[9]);
buf B_RXDATA10 (RXDATA[10], RXDATA_OUT[10]);
buf B_RXDATA11 (RXDATA[11], RXDATA_OUT[11]);
buf B_RXDATA12 (RXDATA[12], RXDATA_OUT[12]);
buf B_RXDATA13 (RXDATA[13], RXDATA_OUT[13]);
buf B_RXDATA14 (RXDATA[14], RXDATA_OUT[14]);
buf B_RXDATA15 (RXDATA[15], RXDATA_OUT[15]);
buf B_RXDATA16 (RXDATA[16], RXDATA_OUT[16]);
buf B_RXDATA17 (RXDATA[17], RXDATA_OUT[17]);
buf B_RXDATA18 (RXDATA[18], RXDATA_OUT[18]);
buf B_RXDATA19 (RXDATA[19], RXDATA_OUT[19]);
buf B_RXDATA20 (RXDATA[20], RXDATA_OUT[20]);
buf B_RXDATA21 (RXDATA[21], RXDATA_OUT[21]);
buf B_RXDATA22 (RXDATA[22], RXDATA_OUT[22]);
buf B_RXDATA23 (RXDATA[23], RXDATA_OUT[23]);
buf B_RXDATA24 (RXDATA[24], RXDATA_OUT[24]);
buf B_RXDATA25 (RXDATA[25], RXDATA_OUT[25]);
buf B_RXDATA26 (RXDATA[26], RXDATA_OUT[26]);
buf B_RXDATA27 (RXDATA[27], RXDATA_OUT[27]);
buf B_RXDATA28 (RXDATA[28], RXDATA_OUT[28]);
buf B_RXDATA29 (RXDATA[29], RXDATA_OUT[29]);
buf B_RXDATA30 (RXDATA[30], RXDATA_OUT[30]);
buf B_RXDATA31 (RXDATA[31], RXDATA_OUT[31]);
buf B_RXDATA32 (RXDATA[32], RXDATA_OUT[32]);
buf B_RXDATA33 (RXDATA[33], RXDATA_OUT[33]);
buf B_RXDATA34 (RXDATA[34], RXDATA_OUT[34]);
buf B_RXDATA35 (RXDATA[35], RXDATA_OUT[35]);
buf B_RXDATA36 (RXDATA[36], RXDATA_OUT[36]);
buf B_RXDATA37 (RXDATA[37], RXDATA_OUT[37]);
buf B_RXDATA38 (RXDATA[38], RXDATA_OUT[38]);
buf B_RXDATA39 (RXDATA[39], RXDATA_OUT[39]);
buf B_RXDATA40 (RXDATA[40], RXDATA_OUT[40]);
buf B_RXDATA41 (RXDATA[41], RXDATA_OUT[41]);
buf B_RXDATA42 (RXDATA[42], RXDATA_OUT[42]);
buf B_RXDATA43 (RXDATA[43], RXDATA_OUT[43]);
buf B_RXDATA44 (RXDATA[44], RXDATA_OUT[44]);
buf B_RXDATA45 (RXDATA[45], RXDATA_OUT[45]);
buf B_RXDATA46 (RXDATA[46], RXDATA_OUT[46]);
buf B_RXDATA47 (RXDATA[47], RXDATA_OUT[47]);
buf B_RXDATA48 (RXDATA[48], RXDATA_OUT[48]);
buf B_RXDATA49 (RXDATA[49], RXDATA_OUT[49]);
buf B_RXDATA50 (RXDATA[50], RXDATA_OUT[50]);
buf B_RXDATA51 (RXDATA[51], RXDATA_OUT[51]);
buf B_RXDATA52 (RXDATA[52], RXDATA_OUT[52]);
buf B_RXDATA53 (RXDATA[53], RXDATA_OUT[53]);
buf B_RXDATA54 (RXDATA[54], RXDATA_OUT[54]);
buf B_RXDATA55 (RXDATA[55], RXDATA_OUT[55]);
buf B_RXDATA56 (RXDATA[56], RXDATA_OUT[56]);
buf B_RXDATA57 (RXDATA[57], RXDATA_OUT[57]);
buf B_RXDATA58 (RXDATA[58], RXDATA_OUT[58]);
buf B_RXDATA59 (RXDATA[59], RXDATA_OUT[59]);
buf B_RXDATA60 (RXDATA[60], RXDATA_OUT[60]);
buf B_RXDATA61 (RXDATA[61], RXDATA_OUT[61]);
buf B_RXDATA62 (RXDATA[62], RXDATA_OUT[62]);
buf B_RXDATA63 (RXDATA[63], RXDATA_OUT[63]);
buf B_RXDISPERR0 (RXDISPERR[0], RXDISPERR_OUT[0]);
buf B_RXDISPERR1 (RXDISPERR[1], RXDISPERR_OUT[1]);
buf B_RXDISPERR2 (RXDISPERR[2], RXDISPERR_OUT[2]);
buf B_RXDISPERR3 (RXDISPERR[3], RXDISPERR_OUT[3]);
buf B_RXDISPERR4 (RXDISPERR[4], RXDISPERR_OUT[4]);
buf B_RXDISPERR5 (RXDISPERR[5], RXDISPERR_OUT[5]);
buf B_RXDISPERR6 (RXDISPERR[6], RXDISPERR_OUT[6]);
buf B_RXDISPERR7 (RXDISPERR[7], RXDISPERR_OUT[7]);
buf B_RXLOSSOFSYNC0 (RXLOSSOFSYNC[0], RXLOSSOFSYNC_OUT[0]);
buf B_RXLOSSOFSYNC1 (RXLOSSOFSYNC[1], RXLOSSOFSYNC_OUT[1]);
buf B_RXNOTINTABLE0 (RXNOTINTABLE[0], RXNOTINTABLE_OUT[0]);
buf B_RXNOTINTABLE1 (RXNOTINTABLE[1], RXNOTINTABLE_OUT[1]);
buf B_RXNOTINTABLE2 (RXNOTINTABLE[2], RXNOTINTABLE_OUT[2]);
buf B_RXNOTINTABLE3 (RXNOTINTABLE[3], RXNOTINTABLE_OUT[3]);
buf B_RXNOTINTABLE4 (RXNOTINTABLE[4], RXNOTINTABLE_OUT[4]);
buf B_RXNOTINTABLE5 (RXNOTINTABLE[5], RXNOTINTABLE_OUT[5]);
buf B_RXNOTINTABLE6 (RXNOTINTABLE[6], RXNOTINTABLE_OUT[6]);
buf B_RXNOTINTABLE7 (RXNOTINTABLE[7], RXNOTINTABLE_OUT[7]);
buf B_RXREALIGN (RXREALIGN, RXREALIGN_OUT);
buf B_RXRECCLK (RXRECCLK, RXRECCLK_OUT);
buf B_RXRUNDISP0 (RXRUNDISP[0], RXRUNDISP_OUT[0]);
buf B_RXRUNDISP1 (RXRUNDISP[1], RXRUNDISP_OUT[1]);
buf B_RXRUNDISP2 (RXRUNDISP[2], RXRUNDISP_OUT[2]);
buf B_RXRUNDISP3 (RXRUNDISP[3], RXRUNDISP_OUT[3]);
buf B_RXRUNDISP4 (RXRUNDISP[4], RXRUNDISP_OUT[4]);
buf B_RXRUNDISP5 (RXRUNDISP[5], RXRUNDISP_OUT[5]);
buf B_RXRUNDISP6 (RXRUNDISP[6], RXRUNDISP_OUT[6]);
buf B_RXRUNDISP7 (RXRUNDISP[7], RXRUNDISP_OUT[7]);
buf B_TXBUFERR (TXBUFERR, TXBUFERR_OUT);
buf B_TXKERR0 (TXKERR[0], TXKERR_OUT[0]);
buf B_TXKERR1 (TXKERR[1], TXKERR_OUT[1]);
buf B_TXKERR2 (TXKERR[2], TXKERR_OUT[2]);
buf B_TXKERR3 (TXKERR[3], TXKERR_OUT[3]);
buf B_TXKERR4 (TXKERR[4], TXKERR_OUT[4]);
buf B_TXKERR5 (TXKERR[5], TXKERR_OUT[5]);
buf B_TXKERR6 (TXKERR[6], TXKERR_OUT[6]);
buf B_TXKERR7 (TXKERR[7], TXKERR_OUT[7]);
// buf B_TXN (TXN, TXN_OUT);
buf B_TXOUTCLK (TXOUTCLK, TXOUTCLK_OUT);
// buf B_TXP (TXP, TXP_OUT);
buf B_TXRUNDISP0 (TXRUNDISP[0], TXRUNDISP_OUT[0]);
buf B_TXRUNDISP1 (TXRUNDISP[1], TXRUNDISP_OUT[1]);
buf B_TXRUNDISP2 (TXRUNDISP[2], TXRUNDISP_OUT[2]);
buf B_TXRUNDISP3 (TXRUNDISP[3], TXRUNDISP_OUT[3]);
buf B_TXRUNDISP4 (TXRUNDISP[4], TXRUNDISP_OUT[4]);
buf B_TXRUNDISP5 (TXRUNDISP[5], TXRUNDISP_OUT[5]);
buf B_TXRUNDISP6 (TXRUNDISP[6], TXRUNDISP_OUT[6]);
buf B_TXRUNDISP7 (TXRUNDISP[7], TXRUNDISP_OUT[7]);

buf B_BREFCLKNIN (BREFCLKNIN_IN, BREFCLKNIN);
buf B_BREFCLKPIN (BREFCLKPIN_IN, BREFCLKPIN);
buf B_CHBONDI0 (CHBONDI_IN[0], CHBONDI[0]);
buf B_CHBONDI1 (CHBONDI_IN[1], CHBONDI[1]);
buf B_CHBONDI2 (CHBONDI_IN[2], CHBONDI[2]);
buf B_CHBONDI3 (CHBONDI_IN[3], CHBONDI[3]);
buf B_DISPREGSEL0 (DISPREGSEL_IN[0], DISPREGSEL[0]);
buf B_DISPREGSEL1 (DISPREGSEL_IN[1], DISPREGSEL[1]);
buf B_DISPREGSEL2 (DISPREGSEL_IN[2], DISPREGSEL[2]);
buf B_ENCHANSYNC (ENCHANSYNC_IN, ENCHANSYNC);
buf B_ENMCOMMAALIGN (ENMCOMMAALIGN_IN, ENMCOMMAALIGN);
buf B_ENPCOMMAALIGN (ENPCOMMAALIGN_IN, ENPCOMMAALIGN);
buf B_LOOPBACK0 (LOOPBACK_IN[0], LOOPBACK[0]);
buf B_LOOPBACK1 (LOOPBACK_IN[1], LOOPBACK[1]);
buf B_PMACMIN (PMACMIN_IN, PMACMIN);
buf B_PMALOOPBACK0 (PMALOOPBACK_IN[0], PMALOOPBACK[0]);
buf B_PMALOOPBACK1 (PMALOOPBACK_IN[1], PMALOOPBACK[1]);
buf B_PMAPWRDN0 (PMAPWRDN_IN[0], PMAPWRDN[0]);
buf B_PMAPWRDN1 (PMAPWRDN_IN[1], PMAPWRDN[1]);
buf B_PMAPWRDN2 (PMAPWRDN_IN[2], PMAPWRDN[2]);
buf B_PMAREGADDR0 (PMAREGADDR_IN[0], PMAREGADDR[0]);
buf B_PMAREGADDR1 (PMAREGADDR_IN[1], PMAREGADDR[1]);
buf B_PMAREGADDR2 (PMAREGADDR_IN[2], PMAREGADDR[2]);
buf B_PMAREGADDR3 (PMAREGADDR_IN[3], PMAREGADDR[3]);
buf B_PMAREGADDR4 (PMAREGADDR_IN[4], PMAREGADDR[4]);
buf B_PMAREGADDR5 (PMAREGADDR_IN[5], PMAREGADDR[5]);
buf B_PMAREGDATAIN0 (PMAREGDATAIN_IN[0], PMAREGDATAIN[0]);
buf B_PMAREGDATAIN1 (PMAREGDATAIN_IN[1], PMAREGDATAIN[1]);
buf B_PMAREGDATAIN2 (PMAREGDATAIN_IN[2], PMAREGDATAIN[2]);
buf B_PMAREGDATAIN3 (PMAREGDATAIN_IN[3], PMAREGDATAIN[3]);
buf B_PMAREGDATAIN4 (PMAREGDATAIN_IN[4], PMAREGDATAIN[4]);
buf B_PMAREGDATAIN5 (PMAREGDATAIN_IN[5], PMAREGDATAIN[5]);
buf B_PMAREGDATAIN6 (PMAREGDATAIN_IN[6], PMAREGDATAIN[6]);
buf B_PMAREGDATAIN7 (PMAREGDATAIN_IN[7], PMAREGDATAIN[7]);
buf B_PMAREGLOAD (PMAREGLOAD_IN, PMAREGLOAD);
buf B_PMAREGRW (PMAREGRW_IN, PMAREGRW);
buf B_PMAREGSTROBE (PMAREGSTROBE_IN, PMAREGSTROBE);
buf B_PMARXCLK0SEL (PMARXCLK0SEL_IN, PMARXCLK0SEL);
buf B_PMARXCLK1SEL (PMARXCLK1SEL_IN, PMARXCLK1SEL);
buf B_PMARXLATCHSEL (PMARXLATCHSEL_IN, PMARXLATCHSEL);
buf B_PMARXRECCLKSEL0 (PMARXRECCLKSEL_IN[0], PMARXRECCLKSEL[0]);
buf B_PMARXRECCLKSEL1 (PMARXRECCLKSEL_IN[1], PMARXRECCLKSEL[1]);
buf B_PMATERMEN0 (PMATERMEN_IN[0], PMATERMEN[0]);
buf B_PMATERMEN1 (PMATERMEN_IN[1], PMATERMEN[1]);
buf B_PMATXCLK0SEL (PMATXCLK0SEL_IN, PMATXCLK0SEL);
buf B_PMATXCLK1SEL (PMATXCLK1SEL_IN, PMATXCLK1SEL);
buf B_PMATXLATCHSEL (PMATXLATCHSEL_IN, PMATXLATCHSEL);
buf B_PMATXOUTCLKSEL0 (PMATXOUTCLKSEL_IN[0], PMATXOUTCLKSEL[0]);
buf B_PMATXOUTCLKSEL1 (PMATXOUTCLKSEL_IN[1], PMATXOUTCLKSEL[1]);
buf B_POWERDOWN (POWERDOWN_IN, POWERDOWN);
buf B_REFCLK (REFCLK_IN, REFCLK);
buf B_REFCLK2 (REFCLK2_IN, REFCLK2);
buf B_REFCLKBSEL (REFCLKBSEL_IN, REFCLKBSEL);
buf B_REFCLKSEL (REFCLKSEL_IN, REFCLKSEL);
buf B_RXDATAWIDTH0 (RXDATAWIDTH_IN[0], RXDATAWIDTH[0]);
buf B_RXDATAWIDTH1 (RXDATAWIDTH_IN[1], RXDATAWIDTH[1]);
buf B_RXDECODEUSE (RXDECODEUSE_IN, RXDECODEUSE);
buf B_RXINTDATAWIDTH (RXINTDATAWIDTH_IN, RXINTDATAWIDTH);
buf B_RXN (RXN_IN, RXN);
buf B_RXP (RXP_IN, RXP);
buf B_RXPOLARITY (RXPOLARITY_IN, RXPOLARITY);
buf B_RXRESET (RXRESET_IN, RXRESET);
buf B_RXUSRCLK (RXUSRCLK_IN, RXUSRCLK);
buf B_RXUSRCLK2 (RXUSRCLK2_IN, RXUSRCLK2);
buf B_TXDATAWIDTH0 (TXDATAWIDTH_IN[0], TXDATAWIDTH[0]);
buf B_TXDATAWIDTH1 (TXDATAWIDTH_IN[1], TXDATAWIDTH[1]);
buf B_TXINTDATAWIDTH (TXINTDATAWIDTH_IN, TXINTDATAWIDTH);
buf B_TXBYPASS8B10B0 (TXBYPASS8B10B_IN[0], TXBYPASS8B10B[0]);
buf B_TXBYPASS8B10B1 (TXBYPASS8B10B_IN[1], TXBYPASS8B10B[1]);
buf B_TXBYPASS8B10B2 (TXBYPASS8B10B_IN[2], TXBYPASS8B10B[2]);
buf B_TXBYPASS8B10B3 (TXBYPASS8B10B_IN[3], TXBYPASS8B10B[3]);
buf B_TXBYPASS8B10B4 (TXBYPASS8B10B_IN[4], TXBYPASS8B10B[4]);
buf B_TXBYPASS8B10B5 (TXBYPASS8B10B_IN[5], TXBYPASS8B10B[5]);
buf B_TXBYPASS8B10B6 (TXBYPASS8B10B_IN[6], TXBYPASS8B10B[6]);
buf B_TXBYPASS8B10B7 (TXBYPASS8B10B_IN[7], TXBYPASS8B10B[7]);
buf B_TXCHARDISPMODE0 (TXCHARDISPMODE_IN[0], TXCHARDISPMODE[0]);
buf B_TXCHARDISPMODE1 (TXCHARDISPMODE_IN[1], TXCHARDISPMODE[1]);
buf B_TXCHARDISPMODE2 (TXCHARDISPMODE_IN[2], TXCHARDISPMODE[2]);
buf B_TXCHARDISPMODE3 (TXCHARDISPMODE_IN[3], TXCHARDISPMODE[3]);
buf B_TXCHARDISPMODE4 (TXCHARDISPMODE_IN[4], TXCHARDISPMODE[4]);
buf B_TXCHARDISPMODE5 (TXCHARDISPMODE_IN[5], TXCHARDISPMODE[5]);
buf B_TXCHARDISPMODE6 (TXCHARDISPMODE_IN[6], TXCHARDISPMODE[6]);
buf B_TXCHARDISPMODE7 (TXCHARDISPMODE_IN[7], TXCHARDISPMODE[7]);
buf B_TXCHARDISPVAL0 (TXCHARDISPVAL_IN[0], TXCHARDISPVAL[0]);
buf B_TXCHARDISPVAL1 (TXCHARDISPVAL_IN[1], TXCHARDISPVAL[1]);
buf B_TXCHARDISPVAL2 (TXCHARDISPVAL_IN[2], TXCHARDISPVAL[2]);
buf B_TXCHARDISPVAL3 (TXCHARDISPVAL_IN[3], TXCHARDISPVAL[3]);
buf B_TXCHARDISPVAL4 (TXCHARDISPVAL_IN[4], TXCHARDISPVAL[4]);
buf B_TXCHARDISPVAL5 (TXCHARDISPVAL_IN[5], TXCHARDISPVAL[5]);
buf B_TXCHARDISPVAL6 (TXCHARDISPVAL_IN[6], TXCHARDISPVAL[6]);
buf B_TXCHARDISPVAL7 (TXCHARDISPVAL_IN[7], TXCHARDISPVAL[7]);
buf B_TXCHARISK0 (TXCHARISK_IN[0], TXCHARISK[0]);
buf B_TXCHARISK1 (TXCHARISK_IN[1], TXCHARISK[1]);
buf B_TXCHARISK2 (TXCHARISK_IN[2], TXCHARISK[2]);
buf B_TXCHARISK3 (TXCHARISK_IN[3], TXCHARISK[3]);
buf B_TXCHARISK4 (TXCHARISK_IN[4], TXCHARISK[4]);
buf B_TXCHARISK5 (TXCHARISK_IN[5], TXCHARISK[5]);
buf B_TXCHARISK6 (TXCHARISK_IN[6], TXCHARISK[6]);
buf B_TXCHARISK7 (TXCHARISK_IN[7], TXCHARISK[7]);
buf B_TXDATA0 (TXDATA_IN[0], TXDATA[0]);
buf B_TXDATA1 (TXDATA_IN[1], TXDATA[1]);
buf B_TXDATA2 (TXDATA_IN[2], TXDATA[2]);
buf B_TXDATA3 (TXDATA_IN[3], TXDATA[3]);
buf B_TXDATA4 (TXDATA_IN[4], TXDATA[4]);
buf B_TXDATA5 (TXDATA_IN[5], TXDATA[5]);
buf B_TXDATA6 (TXDATA_IN[6], TXDATA[6]);
buf B_TXDATA7 (TXDATA_IN[7], TXDATA[7]);
buf B_TXDATA8 (TXDATA_IN[8], TXDATA[8]);
buf B_TXDATA9 (TXDATA_IN[9], TXDATA[9]);
buf B_TXDATA10 (TXDATA_IN[10], TXDATA[10]);
buf B_TXDATA11 (TXDATA_IN[11], TXDATA[11]);
buf B_TXDATA12 (TXDATA_IN[12], TXDATA[12]);
buf B_TXDATA13 (TXDATA_IN[13], TXDATA[13]);
buf B_TXDATA14 (TXDATA_IN[14], TXDATA[14]);
buf B_TXDATA15 (TXDATA_IN[15], TXDATA[15]);
buf B_TXDATA16 (TXDATA_IN[16], TXDATA[16]);
buf B_TXDATA17 (TXDATA_IN[17], TXDATA[17]);
buf B_TXDATA18 (TXDATA_IN[18], TXDATA[18]);
buf B_TXDATA19 (TXDATA_IN[19], TXDATA[19]);
buf B_TXDATA20 (TXDATA_IN[20], TXDATA[20]);
buf B_TXDATA21 (TXDATA_IN[21], TXDATA[21]);
buf B_TXDATA22 (TXDATA_IN[22], TXDATA[22]);
buf B_TXDATA23 (TXDATA_IN[23], TXDATA[23]);
buf B_TXDATA24 (TXDATA_IN[24], TXDATA[24]);
buf B_TXDATA25 (TXDATA_IN[25], TXDATA[25]);
buf B_TXDATA26 (TXDATA_IN[26], TXDATA[26]);
buf B_TXDATA27 (TXDATA_IN[27], TXDATA[27]);
buf B_TXDATA28 (TXDATA_IN[28], TXDATA[28]);
buf B_TXDATA29 (TXDATA_IN[29], TXDATA[29]);
buf B_TXDATA30 (TXDATA_IN[30], TXDATA[30]);
buf B_TXDATA31 (TXDATA_IN[31], TXDATA[31]);
buf B_TXDATA32 (TXDATA_IN[32], TXDATA[32]);
buf B_TXDATA33 (TXDATA_IN[33], TXDATA[33]);
buf B_TXDATA34 (TXDATA_IN[34], TXDATA[34]);
buf B_TXDATA35 (TXDATA_IN[35], TXDATA[35]);
buf B_TXDATA36 (TXDATA_IN[36], TXDATA[36]);
buf B_TXDATA37 (TXDATA_IN[37], TXDATA[37]);
buf B_TXDATA38 (TXDATA_IN[38], TXDATA[38]);
buf B_TXDATA39 (TXDATA_IN[39], TXDATA[39]);
buf B_TXDATA40 (TXDATA_IN[40], TXDATA[40]);
buf B_TXDATA41 (TXDATA_IN[41], TXDATA[41]);
buf B_TXDATA42 (TXDATA_IN[42], TXDATA[42]);
buf B_TXDATA43 (TXDATA_IN[43], TXDATA[43]);
buf B_TXDATA44 (TXDATA_IN[44], TXDATA[44]);
buf B_TXDATA45 (TXDATA_IN[45], TXDATA[45]);
buf B_TXDATA46 (TXDATA_IN[46], TXDATA[46]);
buf B_TXDATA47 (TXDATA_IN[47], TXDATA[47]);
buf B_TXDATA48 (TXDATA_IN[48], TXDATA[48]);
buf B_TXDATA49 (TXDATA_IN[49], TXDATA[49]);
buf B_TXDATA50 (TXDATA_IN[50], TXDATA[50]);
buf B_TXDATA51 (TXDATA_IN[51], TXDATA[51]);
buf B_TXDATA52 (TXDATA_IN[52], TXDATA[52]);
buf B_TXDATA53 (TXDATA_IN[53], TXDATA[53]);
buf B_TXDATA54 (TXDATA_IN[54], TXDATA[54]);
buf B_TXDATA55 (TXDATA_IN[55], TXDATA[55]);
buf B_TXDATA56 (TXDATA_IN[56], TXDATA[56]);
buf B_TXDATA57 (TXDATA_IN[57], TXDATA[57]);
buf B_TXDATA58 (TXDATA_IN[58], TXDATA[58]);
buf B_TXDATA59 (TXDATA_IN[59], TXDATA[59]);
buf B_TXDATA60 (TXDATA_IN[60], TXDATA[60]);
buf B_TXDATA61 (TXDATA_IN[61], TXDATA[61]);
buf B_TXDATA62 (TXDATA_IN[62], TXDATA[62]);
buf B_TXDATA63 (TXDATA_IN[63], TXDATA[63]);
buf B_TXFORCECRCERR (TXFORCECRCERR_IN, TXFORCECRCERR);
buf B_TXINHIBIT (TXINHIBIT_IN, TXINHIBIT);
buf B_TXPOLARITY (TXPOLARITY_IN, TXPOLARITY);
buf B_TXRESET (TXRESET_IN, TXRESET);
buf B_TXUSRCLK (TXUSRCLK_IN, TXUSRCLK);
buf B_TXUSRCLK2 (TXUSRCLK2_IN, TXUSRCLK2);

GT10_SWIFT gt10_swift_1 (
	.ALIGN_COMMA_MSB (ALIGN_COMMA_MSB_BINARY),
	.BREFCLKNIN (BREFCLKNIN_IN),
	.BREFCLKPIN (BREFCLKPIN_IN),
	.CHAN_BOND_LIMIT (CHAN_BOND_LIMIT_BINARY),
	.CHAN_BOND_MODE (CHAN_BOND_MODE_BINARY),
	.CHAN_BOND_OFFSET (CHAN_BOND_OFFSET_BINARY),
	.CHAN_BOND_ONE_SHOT (CHAN_BOND_ONE_SHOT_BINARY),
	.CHAN_BOND_SEQ_1_1 (CHAN_BOND_SEQ_1_1),
	.CHAN_BOND_SEQ_1_2 (CHAN_BOND_SEQ_1_2),
	.CHAN_BOND_SEQ_1_3 (CHAN_BOND_SEQ_1_3),
	.CHAN_BOND_SEQ_1_4 (CHAN_BOND_SEQ_1_4),
	.CHAN_BOND_SEQ_2_1 (CHAN_BOND_SEQ_2_1),
	.CHAN_BOND_SEQ_2_2 (CHAN_BOND_SEQ_2_2),
	.CHAN_BOND_SEQ_2_3 (CHAN_BOND_SEQ_2_3),
	.CHAN_BOND_SEQ_2_4 (CHAN_BOND_SEQ_2_4),
	.CHAN_BOND_SEQ_2_USE (CHAN_BOND_SEQ_2_USE_BINARY),
	.CHAN_BOND_SEQ_LEN (CHAN_BOND_SEQ_LEN_BINARY),
	.CHAN_BOND_WAIT (CHAN_BOND_WAIT_BINARY),
	.CHBONDDONE (CHBONDDONE_OUT),
	.CHBONDI (CHBONDI_IN),
	.CHBONDO (CHBONDO_OUT),
	.CLK_CORRECT_USE (CLK_CORRECT_USE_BINARY),
	.CLK_COR_INSERT_IDLE_FLAG (CLK_COR_INSERT_IDLE_FLAG_BINARY),
	.CLK_COR_KEEP_IDLE (CLK_COR_KEEP_IDLE_BINARY),
	.CLK_COR_REPEAT_WAIT (CLK_COR_REPEAT_WAIT_BINARY),
	.CLK_COR_SEQ_1_1 (CLK_COR_SEQ_1_1),
	.CLK_COR_SEQ_1_2 (CLK_COR_SEQ_1_2),
	.CLK_COR_SEQ_1_3 (CLK_COR_SEQ_1_3),
	.CLK_COR_SEQ_1_4 (CLK_COR_SEQ_1_4),
	.CLK_COR_SEQ_2_1 (CLK_COR_SEQ_2_1),
	.CLK_COR_SEQ_2_2 (CLK_COR_SEQ_2_2),
	.CLK_COR_SEQ_2_3 (CLK_COR_SEQ_2_3),
	.CLK_COR_SEQ_2_4 (CLK_COR_SEQ_2_4),
	.CLK_COR_SEQ_2_USE (CLK_COR_SEQ_2_USE_BINARY),
	.CLK_COR_SEQ_LEN (CLK_COR_SEQ_LEN_BINARY),
	.COMMA_10B_MASK (COMMA_10B_MASK),
	.CRC_END_OF_PKT (CRC_END_OF_PKT_BINARY),
	.CRC_FORMAT (CRC_FORMAT_BINARY),
	.CRC_START_OF_PKT (CRC_START_OF_PKT_BINARY),
	.DEC_MCOMMA_DETECT (DEC_MCOMMA_DETECT_BINARY),
	.DEC_PCOMMA_DETECT (DEC_PCOMMA_DETECT_BINARY),
	.DEC_VALID_COMMA_ONLY (DEC_VALID_COMMA_ONLY_BINARY),
	.DISPREGSEL (DISPREGSEL_IN),
	.ENCHANSYNC (ENCHANSYNC_IN),
	.ENMCOMMAALIGN (ENMCOMMAALIGN_IN),
	.ENPCOMMAALIGN (ENPCOMMAALIGN_IN),
	.GSR (GSR),
	.LOOPBACK (LOOPBACK_IN),
	.MCOMMA_10B_VALUE (MCOMMA_10B_VALUE),
	.MCOMMA_DETECT (MCOMMA_DETECT_BINARY),
	.PCOMMA_10B_VALUE (PCOMMA_10B_VALUE),
	.PCOMMA_DETECT (PCOMMA_DETECT_BINARY),
	.PMACMIN (PMACMIN_IN),
	.PMACMOUT (PMACMOUT_OUT),
	.PMALOOPBACK (PMALOOPBACK_IN),
	.PMAPWRDN (PMAPWRDN_IN),
	.PMAREGADDR (PMAREGADDR_IN),
	.PMAREGDATAIN (PMAREGDATAIN_IN),
	.PMAREGLOAD (PMAREGLOAD_IN),
	.PMAREGRW (PMAREGRW_IN),
	.PMAREGSTROBE (PMAREGSTROBE_IN),
	.PMARXCLK0SEL (PMARXCLK0SEL_IN),
	.PMARXCLK1SEL (PMARXCLK1SEL_IN),
	.PMARXFDETSEL (PMARXFDETSEL),
	.PMARXLATCHSEL (PMARXLATCHSEL_IN),
	.PMARXRECCLKSEL (PMARXRECCLKSEL_IN),
	.PMATERMEN (PMATERMEN_IN),
	.PMATXCLK0SEL (PMATXCLK0SEL_IN),
	.PMATXCLK1SEL (PMATXCLK1SEL_IN),
	.PMATXCMSET0 (PMATXCMSET0),
	.PMATXCMSET1 (PMATXCMSET1),
	.PMATXLATCHSEL (PMATXLATCHSEL_IN),
	.PMATXOUTCLKSEL (PMATXOUTCLKSEL_IN),
	.PMATXVCODACSEL (PMATXVCODACSEL_BINARY),
	.PMAVSEL (PMAVSEL_BINARY),
	.PMA_SPEED (PMA_SPEED_BINARY),
	.POWERDOWN (POWERDOWN_IN),
	.REFCLK (REFCLK_IN),
	.REFCLK2 (REFCLK2_IN),
	.REFCLKBSEL (REFCLKBSEL_IN),
	.REFCLKSEL (REFCLKSEL_IN),
	.RXBUFSTATUS (RXBUFSTATUS_OUT),
	.RXCHARISCOMMA (RXCHARISCOMMA_OUT),
	.RXCHARISK (RXCHARISK_OUT),
	.RXCHECKINGCRC (RXCHECKINGCRC_OUT),
	.RXCLKCORCNT (RXCLKCORCNT_OUT),
	.RXCOMMADET (RXCOMMADET_OUT),
	.RXCRCERR (RXCRCERR_OUT),
	.RXDATA (RXDATA_OUT),
	.RXDATAWIDTH (RXDATAWIDTH_IN),
	.RXDECODEUSE (RXDECODEUSE_IN),
	.RXDISPERR (RXDISPERR_OUT),
	.RXINTDATAWIDTH (RXINTDATAWIDTH_IN),
	.RXLOSSOFSYNC (RXLOSSOFSYNC_OUT),
	.RXN (RXN_IN),
	.RXNOTINTABLE (RXNOTINTABLE_OUT),
	.RXP (RXP_IN),
	.RXPOLARITY (RXPOLARITY_IN),
	.RXREALIGN (RXREALIGN_OUT),
	.RXRECCLK (RXRECCLK_OUT),
	.RXRESET (RXRESET_IN),
	.RXRUNDISP (RXRUNDISP_OUT),
	.RXUSRCLK (RXUSRCLK_IN),
	.RXUSRCLK2 (RXUSRCLK2_IN),
	.RX_BUFFER_USE (RX_BUFFER_USE_BINARY),
	.RX_CRC_USE (RX_CRC_USE_BINARY),
	.RX_LOSS_OF_SYNC_FSM (RX_LOSS_OF_SYNC_FSM_BINARY),
	.RX_LOS_INVALID_INCR (RX_LOS_INVALID_INCR_BINARY),
	.RX_LOS_THRESHOLD (RX_LOS_THRESHOLD_BINARY),
	.SH_CNT_MAX (SH_CNT_MAX),
	.SH_INVALID_CNT_MAX (SH_INVALID_CNT_MAX),
	.TXBUFERR (TXBUFERR_OUT),
	.TXBYPASS8B10B (TXBYPASS8B10B_IN),
	.TXCHARDISPMODE (TXCHARDISPMODE_IN),
	.TXCHARDISPVAL (TXCHARDISPVAL_IN),
	.TXCHARISK (TXCHARISK_IN),
	.TXDATA (TXDATA_IN),
	.TXDATAWIDTH (TXDATAWIDTH_IN),
	.TXFORCECRCERR (TXFORCECRCERR_IN),
	.TXINHIBIT (TXINHIBIT_IN),
	.TXINTDATAWIDTH (TXINTDATAWIDTH_IN),
	.TXKERR (TXKERR_OUT),
	.TXN (TXN),
	.TXOUTCLK (TXOUTCLK_OUT),
	.TXP (TXP),
	.TXPOLARITY (TXPOLARITY_IN),
	.TXRESET (TXRESET_IN),
	.TXRUNDISP (TXRUNDISP_OUT),
	.TXUSRCLK (TXUSRCLK_IN),
	.TXUSRCLK2 (TXUSRCLK2_IN),
	.TX_6466GEARBOX_USE (TX_6466GEARBOX_USE_BINARY),
	.TX_6466SCRAMBLER_USE (TX_6466SCRAMBLER_USE_BINARY),
	.TX_BUFFER_USE (TX_BUFFER_USE_BINARY),
	.TX_CRC_FORCE_VALUE (TX_CRC_FORCE_VALUE),
	.TX_CRC_USE (TX_CRC_USE_BINARY)
);

specify
	(RXUSRCLK => CHBONDO) = (100, 100);
	(RXUSRCLK2 => CHBONDDONE) = (100, 100);
	(RXUSRCLK2 => RXBUFSTATUS) = (100, 100);
	(RXUSRCLK2 => RXCHARISCOMMA) = (100, 100);
	(RXUSRCLK2 => RXCHARISK) = (100, 100);
	(RXUSRCLK2 => RXCHECKINGCRC) = (100, 100);
	(RXUSRCLK2 => RXCLKCORCNT) = (100, 100);
	(RXUSRCLK2 => RXCOMMADET) = (100, 100);
	(RXUSRCLK2 => RXCRCERR) = (100, 100);
	(RXUSRCLK2 => RXDATA) = (100, 100);
	(RXUSRCLK2 => RXDISPERR) = (100, 100);
	(RXUSRCLK2 => RXLOSSOFSYNC) = (100, 100);
	(RXUSRCLK2 => RXNOTINTABLE) = (100, 100);
	(RXUSRCLK2 => RXREALIGN) = (100, 100);
	(RXUSRCLK2 => RXRUNDISP) = (100, 100);
	(TXUSRCLK2 => PMACMOUT) = (100, 100);
	(TXUSRCLK2 => TXBUFERR) = (100, 100);
	(TXUSRCLK2 => TXKERR) = (100, 100);
	(TXUSRCLK2 => TXRUNDISP) = (100, 100);
endspecify
endmodule